• Cxc-06 Raw Fiber Content Analyzer
  • Cxc-06 Raw Fiber Content Analyzer
  • Cxc-06 Raw Fiber Content Analyzer
  • Cxc-06 Raw Fiber Content Analyzer
  • Cxc-06 Raw Fiber Content Analyzer
  • Cxc-06 Raw Fiber Content Analyzer

Cxc-06 Raw Fiber Content Analyzer

After-sales Service: Online Technical Support
Warranty: 1 Year
Element: Fiber Content
Analysis: Fiber Content
Display: Digital
Application: Agriculture
Customization:
Gold Member Since 2021

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
CXC-06
Weight
30kg
Measuring Sample Quantity
6/Times
Measuring Time
About 100min
Power
AC220V/501Hz, 2800W
Water Pressure
>1.5MPa
Water Temperature
<20°c
Size
670×450×670mm
Trademark
West Tune
Origin
China
HS Code
9029109000
Production Capacity
1000units/Year

Product Description

WEST TUNE CXC-06 Raw Fiber Content Analyzer

Description:

Raw /Coarse Fiber Analyzer tests raw fiber content according to acid and alkali boiling method.
It adopts accurate concentration acid and alkali to boil samples in particular condition, then remove soluble substances by ether, deduct the amount of minerals by high temperature burning.

Cxc-06 Raw Fiber Content Analyzer
Features:

1. The weighing process must be accurate (close the balance door), do not use the hand with the crucible, with clamps to take;
2. When adding liquid to the instrument in the second and subsequent steps, the liquid must be hot to avoid the explosion of the instrument tube due to the difference in temperature;
3 instrument cleaning is best not to use washing powder, cleaning and other solvents, it is best to choose hot water to clean, if indeed cleaning is not clean, can use a small amount of solvent to clean;
4. After acidolysis (or alkalolysis) is completed, the drainage should be carried out slowly to prevent the floating sample from adhering to the digestion tube wall. If the sample adheres firmly and cannot be cleaned with water, a soft brush can be used to gently brush it off from the bottom;
5. Quartz crucible to take gently, avoid broken, broken, broken, etc.;
6. If crucible use was significantly blocked for a long time, can be put to the horse after drying furnace to burn at 500 degrees 1-2 hours, cooling again after cleaning.

Technical specification:

Measuring object raw fiber content in various kinds of grain, feed, food and other agriculture and sideline products
Measuring sample quantity 6/times
Reproducibility error Raw fiber level < 10%
absolute value error≤0.4%
Raw fiber level >10%
absolute value error≤4%
Measuring time about 100min (including acid 40min, alkali 40min, filter and wash 20 min)
Power AC220V/501HZ, 2800W
Water supply water pressure >1.5MPa
water temperature <20°C
Size 670×450×670mm
Weight 30kg

Company ProfileCxc-06 Raw Fiber Content Analyzer
Cxc-06 Raw Fiber Content AnalyzerCxc-06 Raw Fiber Content AnalyzerCxc-06 Raw Fiber Content AnalyzerCxc-06 Raw Fiber Content AnalyzerCxc-06 Raw Fiber Content Analyzer

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now